Web Enabled Energy Meter for Submetering and Tracking, kWh Meter, Power Measurement, Energy Management, Load Profile, Billing
image
image
image


Energy Meter:

Energy Tracking is a energy meter manufacturer that provides revenue grade (0.2%) meters that can be used for energy measurement in commercial and industrial facilities. Power / Energy meters are also known as kiloWatt-hour (kWh) meters. Our web enabled energy meter can easily interface with different services such as 3-phase 4-Wire (WYE) or 3-phase 3-Wire (DELTA). It supports a wide input voltage range from 120 to 480 VAC. Our two models supports a secondary 0-5 Amp current transformer (CT) or a 333mVAC CT.

This advanced energy meter measures both Active Energy (kWh) and Reactive Energy (kVARh). It also provides voltage, current and power factor by phase which allows you to check if all phases are balanced and if not, identify them and take corrective action. Peak Demand (kW) is also measured over a 15 or 30 minute period. All data is stored in non volatile flash memory which prevents data loss during power failure. In addition to energy metering, this electric meter can also perform power metering and provide instanteneous values on kVAR and kVA.

This smart energy meter can also provide periodic energy usage (load profile) every 1 to 60 minutes. Reports can be dispatched automatically via email, ftp, Web Service or can be viewed on its on board web server.


| Solutions | Demand Response | Reports | Overview | Company | Software | WEM |
image

WEM-MX-24 5th Gen



Web Enabled Meter 333mV WEM-MX 333mV 4th Gen



WEM-MX 333mV WEM-MX 333mV 3rd Gen



WEM-MX 5A
WEM-MX 5A 2nd Gen

image